The Basics Of Electric Car Charging & Stations

With a lot of the US standards, electrical vehicle charging can seem very complicated, but in all honesty, it’s not that difficult. There are three levels of electric vehicle charging. Level one typically refers to 120-volt AC charging; what you would normally find in a regular house outlet. Level 2 consists of a 240-volt charging system, this would be the power that is accessible at local charging stations or if you have a 240v outlet installed in a garage for faster and efficient charging at home. Finally, level 3 which refers to DC fast charging, which is something you would utilize while taking a long trip. With level one and level two charging you are able to use a standard J1772 plug. Most electric vehicles are compatible with the J1772 plug.

When it comes to AC charging When using AC charging for level one and level two power you are actually using your cars onboard charger. How quickly your battery replenishes is dependent on a few variables like how much power your vehicles onboard charger can handle, how much current the EVSE or the charge cord you are using can deliver, and what power delivery capabilities are of the electrical breaker you are connected to. The typical electric vehicle will include a level 120 volt charging cable. These are normally good for 3 to 4 miles of range per hour charged. If you don’t have a long commute or do a lot of driving for the day, this is enough power to run off. However, If you do a lot of driving during the day you’re probably going to need a 240 V charging solution for your car, so you’ll be able to charge it overnight while you sleep. Any electric car charging station michigan is very convenient for drivers in the area.

For most electrical vehicles this will involve an additional expense in purchasing a 240 V charger station or upgrading your standard charging cord to handle a 240 V charging to handle this kind of electrical power. There are some services available that will upgrade them for you. There is also the cost of installing a 240 V breaker and an outlet for a set charging station. Total cost for these level two charging solutions can easily range from $450 to $800 plus and that is assuming you don’t need any major panel upgrades. The cost is also highly depending upon where you live, what electricians cost in your area, and weather permitting is required for the installation of a charging station or not. No worries, because 240 V level 2 charging is what you’re going to encounter most frequently out in the wild if you are not near home with public charging stations. With that being said, home charging is still going to be your least expensive option, but if you are in the Michigan area you will find electric vehicle charging stations & services easy and convenient. Hopefully, you found these basics of electrical car & charging information useful for your next stop!…

Choose The Right Pipe Camera For Accurate Inspection

Imagine the ability to give your customers a service that truly gets the job done. Imagine being able to give customers the best diagnosis possible. Imagine having a business where when you come in to do a job you know that you will accurately figure out what is wrong faster than anyone else. If these are the kinds of things that you are attracted to as a business person, then having a pipe inspection camera will serve you very well. It is simply a tool that you must have.

Lighten Your Load

The work that you do is already difficult enough, but here is a way to make it a lot easier. Using the right technology such as a pipe camera will definitely make your life a lot easier. Gone are the days where people in your industry were not able to truly inspect pipes on a deep internal level to the degree that we are able to do today. We are now able to run these cameras inside a client’s pipes to know what truly is the problem. This often benefits both parties, saving both time and money.

Saves Time

We cannot overstate the value of saving time in this industry, because time is money. The ability to quickly perform a thorough and accurate pipe inspection is something that will help you make a lot more money and satisfy more customers. Customers love it when you can quickly figure out what is wrong, and when you can quickly remedy their problems. Your ability to quickly help clients will also help your bottom line as well because you’ll be able to help more people. That is the power of modern technology, it allows us to do things that we once were not able to do and we can do it a lot quicker.

Choose Reliable Equipment

It is quite obvious that having a pipe camera is very important when you want to do a thorough and accurate inspection of pipes, but not all pipe cameras are created equally. It is similar to many different products where you have companies who create great and reliable equipment, and those who create equipment that isn’t so good. One of your main concerns has to be finding the right equipment for the job that will last a long time, and that will be accurate while costing the right amount of money.

Choose The Right Company

Beyond just finding the right equipment to purchase, you need to also have a focus on finding the right company to purchase from. Just like not all models of pipe cameras are created equally, not all companies who will sell you these products are created the same. Your goal has to be to find a company with a great reputation, a company who can give you valuable advice, a company who will tell you the different models that are available, and who will give you a lot of insight on what you should purchase.
When you have found such a company, you have found a great thing.

The Importance Of Sewer Maintenance And Cleaning

All businesses and private homes in Chicago rely on plumbers to keep their sewer lines clean and free-flowing. If any property owner has had raw sewage back up into their home or building, it causes problems. Property owners do not want this to happen again. It is for this reason plumbers set up a scheduled sewer cleaning chicago il. Regular cleaning of sewer lines helps to avoid the pipes from becoming obstructed, backing up wastewater into the property. When there is a sewer backing up onto the property or within a structure, the professional plumber runs a camera mounted to a long cable line attached to a computer screen. As the plumber guides the camera through the sewer line, the plumber watches the computer screen looking for problems in the sewer. When the plumber sees the problem, they usually remedy the problem at that time.

How Does the Plumber Solve Sewer Backups?

Accumulated, thickened grease, collapsed tiles in the sewer line, tree roots, excess toilet paper, gravel, dirt, sand, toys flushed by children are a few common sewer problems plumbers see in sewer lines. If the plumber sees excess paper in the pipes or finds an overabundance of grease, the plumber may jet flush the sewer line. This high powered water pushes the obstruction into the more massive main sewer line to float away. The plumber may call for a vacuum truck to suck up certain debris disposing the waste into a landfill. If the problem is roots, the plumber cuts the roots out of the sewer tiles. If the plumber finds collapsed tiles, it is a primary repair job. The plumber must dig down to the tiles with a backhoe and replace the broken tiles. Collapsed tiles are prone to happen in old sewer lines causing specific issues, possibly costing the property owner thousands of dollars. Sewer tiles usually last 50-60 years before causing problems.

Can a Homeowner Find the Obstruction in Sewer Lines

The answer is no because a camera line must go through the sewer line hooked up to a computer screen. This equipment is costly. It is cost-effective to call a plumber to do this task. The plumber does not even know what the problem is without sending a camera through the line. The property owner can check the line for standing water in the main drain or sewer line. The homeowner finds this cleanout in the basement, crawlspace, or the yard. All the homeowner has to do is remove the plug and look. Looking into the drain with a flashlight shows the homeowner if there is any standing water as there should be no water in this pipe. If there is a utility hole cover front of the property the plumber cannot remove this cover. The plumber needs to call city or county maintenacne to come and see if this is their problem and not a homeowner issue.